Trainings
Before you sign up for in-person training
Please make sure you have completed all of the following:
- ☐ The in-person orientation
- ☐ The Machine Shop and Makerspace Safety-Soldering Required (EHS) online training
- ☐ A specific project in mind (required for machine trainings, due to high demand)
Please arrive on time. If you are more than 10 minutes late, you will not be able to attend and will need to reschedule your training.
Self-guided instructions for equipment that doesn't require in-person training. Printed copies are typically posted at each machine.
Cricut & Sticker Printer
Dye Sublimation & Heat Press
In-person Heat Press training is listed under Level I below.
FDM 3D Printing
Pop3 3D Scanner
Before you use it: Reach out to Joe to reserve time. The scanner must stay in the REEF.
Soldering
*The training calendar is a 30-day rolling calendar. New training availability will appear each week.
Polymer Casting Room Orientation + Spray Booth

Time: About 10 minutes · Before training: No preparation needed
We will go over safety of the polymer casting room and how to operate the spray booth. This training does not cover how to perform polymer casting (silicone and urethane). This is not a foundry.
Embroidery Machine

Time: About 45 minutes · Before training: No preparation needed
In this training, you will learn how to thread the embroidery machine and create an embroidered element.
Heat Press

Time: About 20 minutes · Before training: Bring your specific project
This training goes over the Heat Press used in conjunction with the Dye Sublimation Printer. Training is tailored to your specific project. Cotton materials do not work with this setup.
Intro to Woodshop

Time: About 60 minutes · Before training: Have a project in mind (high demand)
In this training, you will learn how to safely operate the vertical bandsaw, the scroll saw, the belt and disc sander, and the compound miter saw. You do not need to bring any supplies.
Laser Cutting/Engraving

Time: About 45 minutes · Before training: Watch this 5-minute video to learn our laser process
In this training, you will learn how to safely operate the laser machine by engraving and cutting out a custom design.
Level II trainings cover advanced equipment and are scheduled individually. To book, email Joe Kile at jkile@seas.harvard.edu with:
- the training(s) you want
- confirmation that you've completed the prerequisite
- a few times you're available
Woodshop
Prerequisite: Intro to Woodshop
- Cabinet Router
- Drill Press
- Panel Saw
- 4’ x 4’ CNC Router: watch these before your session:
Casting Room
Prerequisite: Casting Room Orientation
- Thermoformer
Desktop CNC (Carvera Air)
- Carvera Air: you'll design your parts in Fusion 360, so please install it before your session. Watch beforehand: